- 模块 UDMII Plus LP 180D (Type D) (H)
- 内建硬件ECC引擎
- 全区平均抹写技术(Global Wear Leveling)
- 闪存坏区管理
- S.M.A.R.T.功能
- 卡榫接头设计
模块
UDMII Plus LP 180D (Type D) (H)
产品概述
|
Introduction |
Apacer’s USB-Disk Module (UDM) II Plus is a USB2.0 high speed flash storage designed to replace a conventional IDE hard disk drive. UDMII Plus LP 180D coming with both w/o houing and with house can be plugged into a standard Embedded USB connector commonly found in desktops, portable PC systems and industrial PC systems. This product is well suited for embedded flash storage applications offering new and expanded functionality as well as more cost-effective designs, better performance and increased reliability.
产品规格
规格表
-
型号UDMII Plus LP 180D (Type D) (H)
-
介面USB 2.0
-
接口10-pin USB (2 x 5 header)
-
板型USB Disk Module
-
NAND 颗粒SLC
-
容量256MB~32GB
-
读取速度(MB/sec)Up to 34
-
写入速度(MB/sec)Up to 22
-
ECC纠错功能Built-in 24-bit per 1K bytes BCH ECC
-
标准作业温度(°C)0 ~ + 70
-
最高作业温度(°C)-40 ~ + 85
-
放置温度(°C)-40 ~ + 100
-
外壳Optional
-
硬件写保护Optional
-
冲击耐力Half sine wave 50G, 6 axes, 18 times
(IEC 68-2-27, non-operating) -
震动耐力Sine wave 10 Hz to 500 Hz, 50 m/s2, 3 axes
(IEC 68-2-6, non-operating) -
电压5.0 V ± 5%
-
用电量Active mode: 181 mA; Idle mode: 68 mA
-
尺寸 (L x W x H )Without Housing: 33.65 x 24.00 x 7.00 mm
With Housing: 35.70 x 28.10 x 7.20 mm -
MTBF (小时)>2,000,000